National Instruments Interface Device NI PCI-1426 User Manual
Page 32
Glossary
G-4
ni.com
T
tap
A stream of pixels from a camera. Some cameras send multiple streams,
or taps, of data over a cable simultaneously to increase transfer rate.
transfer rate
The rate, measured in bytes/s, at which data is moved from source to
destination after software initialization and set up operations. The
maximum rate at which the hardware can operate.
trigger
Any event that causes or starts some form of data capture.
trigger control and
mapping circuitry
Circuitry that routes, monitors, and drives external and RTSI bus trigger
lines. You can configure each of these lines to start or stop acquisition on a
rising or falling edge.
TTL
Transistor-transistor logic.
V
VI
Virtual Instrument. (1) A combination of hardware and/or software
elements, typically used with a PC, that has the functionality of a classic
stand-alone instrument. (2) A LabVIEW software module (VI), which
consists of a front panel user interface and a block diagram program.