NEC uPD780328 Subseries - Manual (Page 32)

CHAPTER 3 INSTALLATION
User’s Manual U16214EJ1V0UM
32
The above steps configure the following circuit and enable supply of the clock from the mounted oscillator to
the emulation device.
Remarks 1. The sections enclosed in broken lines indicate the parts that are attached to the parts board.
2. There is JP8 on the IE-78K0-NS or IE-78K0-NS-A.
(3) When using an external clock
Short the 3 to 4 side on the jumper (JP8) of the IE-78K0-NS or IE-78K0-NS-A. There is no need to make any
settings via the integrated debugger (ID78K0-NS).
Crystal oscillator
+5 V
8
7
14 Parts board
IE-78K0-NS or IE-78K0-NS-A side
(Emulation device)
Target
system
1 3 5
2 4 6
JP8