Bootpdhcprelay maxhopcount, No bootpdhcprelay maxhopcount, Bootpdhcprelay minwaittime – NETGEAR 7300 Series User Manual
Page 195: No bootpdhcprelay minwaittime, Bootpdhcprelay maxhopcount -13, No bootpdhcprelay maxhopcount -13, Bootpdhcprelay minwaittime -13, No bootpdhcprelay minwaittime -13
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Routing Commands
9-13
202-10009-01_060204
bootpdhcprelay maxhopcount
This command configures the maximum allowable relay agent hops for BootP/DHCP Relay on the
system. The <hops> parameter has a range of 1 to 16.
Default
4
Format
bootpdhcprelay maxhopcount <1-16>
Mode
Global Config
no bootpdhcprelay maxhopcount
This command configures the default maximum allowable relay agent hops for BootP/DHCP
Relay on the system.
Format
no bootpdhcprelay maxhopcount
Mode
Global Config
bootpdhcprelay minwaittime
This command configures the minimum wait time in seconds for BootP/DHCP Relay on the
system. When the BOOTP relay agent receives a BOOTREQUEST message, it MAY use the
seconds-since-client-began-booting field of the request as a factor in deciding whether to relay the
request or not. The parameter has a range of 0 to 100 seconds.
Default
0
Format
bootpdhcprelay minwaittime <0-100>
Mode
Global Config
no bootpdhcprelay minwaittime
This command configures the default minimum wait time in seconds for BootP/DHCP Relay on
the system.
Format
no bootpdhcprelay minwaittime
Mode
Global Config