Understanding led indicators, Power and system leds, Ports 1~16 or 1~24 status leds – NetComm NP3024 User Manual
Page 13
YML711 Rev1
NetComm 16 or 24 port Gigabit Switch
www.netcomm.com.au
13
Understanding LED Indicators
The front panel LEDs provides instant status feedback, and assists with monitoring and trouble-
shooting the Switch when necessary.
Figure 5. LED indicators of the Switch
Power and System LEDs
POWER
:
Power Indicator
On
:
When the Power LED is on, the Switch is receiving
power.
Off
:
When the Power LED is off, the Switch is not receiving
power.
SYSTEM
:
Management Indicator
Blinking
:
When the CPU is working, the System LED will blink.
On/Off
:
When the CPU is not working, the System LED will be
off.
Ports 1~16 or 1~24 Status LEDs
Link/ACT
:
Link/Activity
On
:
When the Link/ACT LED is on, the respective port is
successfully connected to an Ethernet network.
Blinking
:
When the Link/ACT LED is blinking, the port is
transmitting or receiving data on the Ethernet network.
Off
:
When the Link/ACT LED is off, there is no link.