Northland Kitchen Appliance Northland Kitchen Appliance - Manual (Page 2)

Inspection
Remove Packaging
Your wine cabinet has been packed for shipment with all
parts that could be damaged by movement securely fas-
tened. Before using, be sure all packing materials and
tape have been removed.
Important
Keep your carton packaging until your wine cabinet has
been thoroughly inspected and found to be in good con-
dition. If there is damage, the packaging will be needed
as proof of damage in transit.
Note to Customer
This merchandise was carefully packed and thoroughly
inspected before leaving our plant. Responsibility for its
safe delivery was assumed by the carrier upon accept-
ance of the shipment. As directed on the side of your
packing carton, claims for loss or damage sustained in
transit must be made on the carrier as follows:
Exterior Damage
Make thorough damage notation on your delivery receipt
and have driver acknowledge by signature and date.
Send a written request asking for an inspection report
from carrier. Include the name of carrier representative
and the date the inspection was requested. Retain
inspection report and receipt for filing of a claim.
Concealed Damage
This must be reported to the carrier within fifteen days.
Obtain inspection report from the carrier. Retain the
inspection report for filing the claim. DO NOT RETURN
DAMAGED MERCHANDISE TO MANUFACTURER -
FILE THE CLAIM WITH THE CARRIER.
How to Install Your
Refrigerated Wine Cabinet
Select Location: The proper location will ensure peak
performance of your appliance. Choose a location where
the unit will be out of direct sunlight and away from heat
sources. Best performance will be achieved in a location
where the room temperature is maintained between 65º
and 90ºF. Operating the wine cooler in a room tempera-
ture outside this range could result in inconsistent wine
storage temperatures.
Cabinet Clearance: Ventilation is required for your unit
to operate properly. For under counter units this is
achieved through the louvers on the lower front toe-grill.
Full-height built-in units require ventilation through the
fascia grille at the top of the unit. Please keep these
areas open and free of obstructions.
Your specific model may have additional installation
instructions included in your literature package. Please
refer to these for specific details regarding installation of
your unit.
Electrical Connection: Use nominal 115 volt, 60 cycle
AC only. DO NOT USE AN EXTENSION CORD
1
Power Supply Cord
with 3-Prong
Grounding Plug*
Grounding Type
Wall Receptacle
Figure 1