National Instruments PXI-6561/6562 - Manual (Page 4)

NI Digital Waveform Generator/Analyzer Guide 4 ni.com
• 1/8 in. flathead screwdriver
• Number 1 Phillips screwdriver
• Microsoft Internet Explorer 5.5 or later
• Measurement & Automation Explorer (MAX) 3.1 or later
• A screen resolution of 800 × 600 with 256 colors (required for the
NI Script Editor)
• The appropriate cable for your device, as shown in the following table:
• NI EMC Filler Panel Kit, available from NI (part number 778700-01)
Recommended System
The recommended system requirements include the following components
and tools:
• Pentium III/Celeron 600 MHz or equivalent processor
• 256 MB RAM
• A PXI chassis and controller or desktop computer
• 1/8 in. flathead screwdriver
• Number 1 Phillips screwdriver
• Microsoft Internet Explorer 5.5 or later
• Measurement & Automation Explorer (MAX) 3.1 or later
• A screen resolution of 800 × 600 with 256 colors (required for the
NI Script Editor)
• The appropriate cable for your device, listed in Table 1.
• A compatible connectivity accessory for your NI digital waveform
generator/analyzer, listed in the following table:
Table 1. NI Digital Waveform Generator/Analyzer Cables
Device Cable Cable Part Number
NI 654X NI SHC68-C68-D2 188142-01
NI 655X NI SHC68-C68-D2 188142-01
NI 656X NI SHB12X-B12X 192344-01
Table 2. NI Digital Waveform Generator/Analyzer Accessories
Accessory Supported Devices
NI CB-2162 NI 654X, NI 655X
NI SMB-2163 NI 654X, NI 655X