Ups/400 – Nikon UPS User Manual
Page 29
UPS/400
. . . an IBM AS/400 UPS power monitoring system . . .
29
procedure – and off at the end. You must insure that there are no other lines varied onto
the resource that you name for this line. In most cases the screen can be used with the
provided defaults.
• Enter the resource name if different from LIN011. The line speed should be left at 2400
and the phone number should be correct unless you do not have a direct line and need
something like “9:” to precede the number in order to get an outside line. Press enter and a
line (ASM$LINE), a controller (ASM$CTL) and a device (ASM$DEV) will be created.
4. Check for another line varied on:
• Use the WRKCFGSTS *LIN ASM$LINE command to look at the status of the ACS line.
Enter a 1 beside it to vary it on. The line should then show connect pending. Now enter a
2 beside it to vary it off. If you get a failure on the vary on, then there is another line
currently varied on to the resource. Enter the command WRKHDWRSC TYPE (*CMN) to
look at all lines that share this resource. Then use WRKCFGSTS command to vary the line
off.
5. Order or view PTFs:
• Use option 1 (Order PTFs from AS/Manager) on the ACS menu to order the PTF. Simply
enter the PTF ID supplied by AS/Manager. The PTF will be transferred to you machine and
will be accompanied by a report highlighting the PTF and giving instruction on how to load
it.
PTF ID: Provided to you by AS/Manager technical support
CUSTOMER INFORMATION: Enter you company name, contact name, and telephone
number.
• A message will be displayed at the bottom of the screen giving the status of the transfer
operation. To view a summary of all available PTFs, enter ASMSUMMARY in the PTF ID.
NOTE: If the keyword *PASSTHRU is keyed into the PTF ID field, AS/Manager technical support
will be able to sign onto your AS/400 to provide online support. Please contact PBS technical
support before entering *PASSTHRU into the PTF ID field.
If you have any questions or problems with the above procedure, contact PBS. technical support at (918)
587-1500.