Netopia 3347W User Manual
Page 10
2-4 Getting Started Guide
Connect your computer, DSL line, and power source as shown.
1.
For a direct computer to router Ethernet connection, use the standard Ethernet cable included with your
router.
2.
Use the supplied RJ-11 telephone cable to connect the router to your DSL wall outlet.
3.
Connect the supplied power brick to a power outlet and the connector end to the router.
4.
Each computer using the wireless network requires its own Wi-Fi CERTIFIED™ 802.11b adapter to be
installed in the computer.
This may be purchased from any Wi-Fi CERTIFIED™ manufacturer for your par ticular computer. See
“Connecting to Your Local Area Network” on page 3-1
You should now have: the power adapter plugged in; the Ethernet cable connected between the router and your
computer; and the telephone cable connected to its appropriate wall jack.
Power
Off / On
LAN
DSL
4
1
2
3
1
DSL
Ethernet
DC Power
2
3
4