Network Computing Devices WUSB11 - Manual (Page 6)

Wireless USB Network Adapter
5
Instant Wireless ® Series
4
Chapter 4: Software Installation
and Configuration for Windows
98SE, Me, and 2000
The Wireless USB Network Adapter Setup Wizard will guide you through the
installation procedure for Windows 98SE, Me, and 2000. The Setup Wizard
will install the WLAN Monitor and driver, as well as configure the Adapter.
Insert the Setup Wizard CD-ROM into your CD-ROM drive. The Setup
Wizard should run automatically, and the Welcome screen should appear. If it
does not, click the Start button and choose Run. In the field that appears, enter
D:\setup.exe (if “D” is the letter of your CD-ROM drive).
Note for Windows 98SE, Me, and 2000 users: You must run the
Setup Wizard to install the software before installing the hardware.
Figure 4-1
Note for Windows XP users: Do NOT run the Wireless USB
Network Adapter Setup Wizard. Proceed directly to “Chapter 5:
Hardware Installation.”
Overview
Chapter 3: Getting to Know the
Wireless USB Network Adapter
Port
USB The Adapter’s USB port is located on the side of the Adapter.
You will attach the included USB cable to this port. The other
end of the cable will connect to your PC’s USB port.
LED Indicators
Power Green. The Power LED lights up when the Adapter is pow-
ered on.
Link Green. The Link LED lights up when the Adapter has an
active connection.
The Wireless USB Network Adapter’s Port and LEDs
Figure 3-1
Figure 3-2