Nikon MOTORMESH 4300 User Manual
Page 18
Product Introduction
July 2007
1-6
Antenna Type
Two (2) omni directional, 8 dBi (for 2.4 GHz Radio) and 10 dBi (for 5.8
GHz Radio)
Antenna Connector
N-Type
Routing
Routing Engine
MeshConnex Layer 2 routing with Layer 1 situational-awareness
Routing Protocol
Patented, hybrid proactive/reactive routing (low latency & fast route
convergence)
IEEE 802.11s Support
Upgradeable to IEEE 802.11s standard via OTA software updates
Network
Network Management Software
MeshManager Element Management System via secure SNMP v.3
Network Interface
10/100Mbps Ethernet (RJ-45) port with surge suppression
Network Segmentation
Multiple SSIDs with VLAN mapping
Quality of Service (QoS)
802.11e, EDCF, 802.11p and the IP precedence of DSCP (ToS) bits
Security
Virtual LAN (VLAN)
Supports up to sixteen (16) per node, or 4094 per network
Client Encryption Support
WEP, WPA (TKIP) and WPA2 (AES, 802.11i)
Internodal Encryption
Intra-Mesh Security
Authentication 802.1X
(Infrastructure/Client) and MAC address hardware authentication
Power
Power Requirements
90-264 VAC (with +/- 20% variation at 47 to 63 Hz)
12V +/- 10% VDC input, certified LPS power supply (orderable option)
Power Connector
AC power cord, 12 ft
Power Consumption
15W (with both radios operating)
22.2W (with Canopy® Connect PoE operational)
29.4W (with IEEE 802.3af Standard PoE device)
Power over Ethernet (PoE)
Canopy and IEEE 802.3af support available
Physical
Dimensions
9”x 6”x 3.5” (23.1cm x 15.2cm x 8.9cm)
Weight
4.5 lbs (2.04kg)
Packaging
Outdoor, all-weather enclosure (NEMA 4)
Mounting
3" (7.62cm) diameter post mounting
Environment
Temperature Range
-30 to +60 °C
Humidity
0 to 95%, non-condensing
Certifications
FCC Part 15 & 90, UL, CSA