RoyalTek RFG-1000 - Manual (Page 8)

8
USB Driver Installation for Windows Operation
System?
Getting Started
Step 1:Plug USB connector to USB port of your laptop or desktop PC.
Step 2: After plugging in RFG-1000, it will automatically detect hardware .
Step 3: Insert RFG-1000 CD, system will automatically search and find the correct
USB driver.
Step 4:Please go to Control Panel>System>Universal Serial Bus Controllers to check
USB driver is successfully installed or not!
Step5. You can check COM port number of RFG-1000 from System properties now.
The default COM port is COM3 in this example.
Caution : During USB driver installation, a message box “Driver is not certificated
by Microsoft” may pop-up. Please crick “Continue” to continue the USB
driver installation.