Radio Shack SYSTEM 2000 - Manual (Page 23)

23
MOUNTING THE MODULE
You can place the module directly on a desk, shelf, or table. Or, you can
mount the module on a wall. To mount the module on the wall, you need
two screws (not supplied) with heads larger than the holes on the back
of the supplied mounting bracket.
Follow these steps to mount the module on a wall.
1. Drill two holes into the wall 2 17 /
32
inches apart.
2. While holding the side of the
mounting bracket against the wall
as shown, thread a mounting
screw through each round hole in
the mounting bracket then tighten
the mounting screws into the wall.
1
8
2 inch 17
32
inch
43-972.fm Page 23 Monday, August 16, 1999 4:19 PM