Radio Shack Go Vision 16-3255 - Manual (Page 13)

Other Connections
13
% 100'%6+0) " 61 " # "% #/%14&'4 ."
) #/' % 1051.' ." 14 "& +)+6#. "% #/'4#
You can connect a camcorder for video playback, or a
digital camera to view pictures. For this connection, if you
have not connected the
OUTPUT jacks to a TV, use the
supplied audio/video cable for this connection.
%QPPGEVKPI"C")COG"%QPUQNG
If you are connecting a game system console, you may
need to connect a DC to AC inverter (not supplied, available
from RadioShack).
± ± ± ±
% 100'%6+0) "#%"2 19'4 " (14 "
+ 0&114 7 5'
You can power the DVD player using the supplied 12V, 2.5
Amp AC adapter.
. . . .
1. To use the DVD player indoors, connect the supplied
AC adapter’s barrel plug into the DC IN 12V jack.
2. Lift up the AC plug module’s two blades and insert the
AC plug to a standard AC outlet.
1. Connect the left (white) and right
(red) plugs on the audio/video
cable to your camcorder’s or
game console’s left (white) and
right (red) Output sockets, and
connect the other end to the
AUDIO INPUT L (white) and R (red)
jacks on the back of your DVD
player.
2. Connect the audio/video cable’s
yellow plug to the VIDEO INPUT
jack on the back of your DVD
player, and the other yellow plug
to the Video Output jack on your
camcorder, game system
console, or digital camera.
±
"016'"
±
"
Some game systems have a
proprietary output cable. Follow
your game system’s hookup
instructions to send audio/video to
the DVD player.
.
"%#76+10"
.
• You must use a Class 2 or ITE
power source that supplies 12V
DC and delivers at least 2.5
Amps. Its center tip must be set
to positive and its plug must fit the
DVD player's DC IN 12V jack.
The supplied adapter meets
these specifications. Using an
adapter that does not meet these
specifications could damage the
DVD player or the adapter.
• Always connect the AC adapter
to the DVD player before you
connect it to AC power. When
you finish, disconnect the adapter
from AC power before you
disconnect it from the DVD
player.