Roberts Radio ecologic 2 User Manual
Page 15
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
14
Operating your radio - FM
1. Carefully extend the telescopic aerial.
2. Press
the
On/Off button to switch on your radio. The display will show
"Roberts" for a few seconds.
3. Press
the
Band button to select the FM band.
4. Press and release the Select button until the display shows "Auto
tune <>".
5. Press
the
Tuning Up button to cause your radio to scan in an upwards
direction (low frequency to high frequency) and stop automatically
when it fi nds a station of suffi cient strength.
6. After a few seconds the display will update and show station name
(if RDS information is available).
7. Press
the
Tuning Down button to scan the FM band in a downwards
direction (high frequency to low frequency).
8. When the waveband end is reached your radio will recommence tuning
from the opposite waveband end.
9. Adjust
the
Volume control to the required setting.
10. To switch off your radio press the On/Off button.
3
2
5
4
7