Rogue Audio Hera - Manual (Page 3)

2
INTRODUCTION
Congratulations on your purchase decision! We at Rogue Audio truly believe that
our preamplifiers provide the “smartest” value in high-end audio. If you have
never owned a vacuum tube preamplifier you will be thrilled by the silky-smooth
sound and incredible detail that only a tube preamplifier can provide. And with
the Hera preamplifier, you can be sure that you are getting the very best in tube
amplification. We at Rogue Audio are extremely proud of our products and want
you to enjoy them to their fullest potential. So please, take the time to read
through this short manual so that you can be confident that you have set up your
preamplifier properly.
UNPACKING THE HERA POWER PREAMPLIFIER
Tools required: none
WARNING - This preamplifier uses voltages that could cause injury or
death. Never open the preamplifier while it is plugged in, and always
wait at least one hour after turning the unit off to unplug and open the
unit. Lethal voltages can remain in the electronics after the unit is
unplugged.
The Hera preamplifier has been painstakingly inspected for cosmetic flaws during
and after assembly. In order not to damage the cosmetic appearance of your
preamplifier it is important that you follow the unpacking instructions carefully.
1. Open the shipping carton and remove the remote control, power cord and
power supply cables from the corners of the carton.
2. Carefully lift the preamplifier out of the carton, and remove the foam pads and
plastic bag.
3. Carefully lift the power supply out of the carton, and remove the foam pads
and plastic bag.
4. Save the packing materials. The packing materials and box have been
carefully designed to protect your valuable equipment during shipping so you
don’t want to throw them away.