Roland AT15 User Manual
Page 39
39
Using the Rhythm Performance
❍
If the following screen appears
The following screens appear when a rhythm has already been saved to the
save destination.
fig.03-17
To cancel the procedure, press the [Reset] button.
10.
Press the [Rec] button again to start coping the Rhythm into
the internal memory.
11.
Press the [Utility] button.
The basic screen reappears.
■
Deleting a Rhythm Saved to the Rhythm [Disk]
Button
1.
Press the [Utility] button.
2.
Press the Menu [
] and [
] button to select “Disk
Rhythm.”
3.
Press the [Rec] button.
4.
Use the Menu [
] and [
] button to select “Delete
Rhythm.”
5.
Press the [Rec] button.
6.
Press the Value [-] and [+] buttons to select the rhythm you
want to delete.
To cancel the procedure, press the [Display/Exit] button.
NOTE
You cannot select “Delete
Rhythm” from the Utility
menu unless a rhythm is
stored to the Rhythm
[Disk] button.
AT-15_e.book 39 ページ ２００５年１月２１日 金曜日 午後８時１４分