Radio Shack ET-893 - Manual (Page 9)

9
Note: If you do not have any special
telephone services, pressing
FLASH
during a telephone conversation might
disconnect your call.
USING REDIAL
To dial the last number dialed, press
TALK/HANG UP , then REDIAL .
Notes:
• If you get a busy signal, you can
press REDIAL again without press-
ing TALK/HANG UP .
• If the phone line has Call Waiting or
requires extra time to get the dial
tone, one-touch redial might not
work. If so, press
FLASH then
REDIAL to redial the number.
• The redial memory holds 31 digits
for tone dialing and 32 digits for
pulse dialing.
• The redial memory does not store a
FLASH entry or any keys you
pressed before FLASH .
USING TONE SERVICES
WITH A PULSE LINE
Some special services, such as bank-
by-phone, require tone signals. If you
have pulse service, you can still use
these special tone services.
With TONE/PULSE set to PULSE , press
at the point where tone signals are re-
quired. Any additional numbers you dial
are sent as tone signals. The phone au-
tomatically resets to pulse dialing when
you hang up.
43-893.fm Page 9 Monday, August 16, 1999 2:23 PM