Roland HP-207 - Manual (Page 18)

16
Before You Play
Plug the speaker cable extending from the stand into
the SPEAKER connector located at the rear of the
HP207’s bottom panel.
Pay attention to the shape of the speaker cable’s
connector, and insert it until you hear it click securely
into place.
fig.SpeakerCable.eps
Plug the pedal cord extending from the stand into
the Pedal connector located at the rear of the
HP207’s bottom panel.
fig.PedalCord.eps
1. Make sure that the [Power] switch located at
the left side of the front panel is off (in the
upward position).
fig.PowerOff-e.eps
2. Turn the [Volume] knob all the way toward the
left to minimize the volume.
3. Connect the included power cord to the AC
INLET located at the rear of the bottom panel.
4. Plug the other end of the power cord into an
AC outlet.
fig.PowerCord.eps
You must use the power cord included with the
HP207.
Getting Ready to Play
Connecting the Speaker Cable
Connecting the Pedal Cord
Connecting the Power Cord
OFF
Upward
position
3
4
NOTE
HP207_e.book 16 ページ ２００６年１２月２５日 月曜日 午前９時５２分