Freely switching between images, P. 262, Connect a variety of video devices to the atelier – Roland AT900C User Manual
Page 264
262
Enjoying Music and Video
You can connect various video devices to the ATELIER, and then use the video
function select buttons on the ATELIER’s panel to freely control the image that’s
shown on the external display or television.
1.
Connect a variety of video devices to the ATELIER.
Connecting a video camera
→
Connecting a DVD player
→
Connecting a portable audio/video player
→
2.
Press the video function select buttons to switch the image
shown in the external display or television.
Turning off the Video function
1.
Press video function select buttons to extinguish the
indicators for all of the buttons.
If all of the video select buttons are extinguished, the image from the video device
connected to the ATELIER will not be displayed.
The television or external display will show the MUSIC ATELIER logo.
Freely Switching Between Images
Button
Function
Page
Camera
Switches to the image from the device connected to
the Camera In connector.
DVD
Switches to the image from the device connected to
the DVD Player In connector.
Ext In
Switches to the image from the device connected to
the Ext In connector.
Video Function Select Buttons
This refers to the following buttons.
[Camera] button
[DVD] button
[Ext In] button
You can also switch the image
by touching the video function
select buttons in the Video
screen or the VIMA TUNES
screen (p. 255).
AT-900_e.book 262 ページ ２００７年９月７日 金曜日 午前８時４３分