Raritan Engineering Command Center CC-SG - Manual (Page 173)

C HAPTER 11: S YSTEM M AINTENANCE 157
Upgrade CC-SG
Note: If you are operating a CC-SG cluster, you must remove the cluster first and upgrade each
node separately.Before you can upgrade CC-SG, you must be in Maintenance Mode. See section
Maintenance Mode in Chapter 11: System Maintenance for additional information.
1. On the Setup menu, click Upgrade CommandCenter. The Upgrade CommandCenter
screen appears.
Figure 185 Upgrade CC-SG Screen
2. If you are upgrading from an older CC-SG, click Browse and navigate to the current location
of your CC files.
3. Click OK.
Restart CC-SG
1. On the Setup menu, click Restart CommandCenter. The Restart CommandCenter screen
appears.
Figure 186 Restart Screen
2. Type your password in the Password field.
3. Accept the default message or type a message to display to any users currently online in the
Broadcast message field (for example, you might give users a brief time period to finish
their tasks in CC-SG or tell them why you are restarting the system). All users will be
disconnected when you restart CC-SG.
4. Type how much time (in minutes) should pass before CC-SG restarts in the Restart after
(min) field.