Radio Shack 43-3544 - Manual (Page 27)

Operation
27
DEL to delete a character. To
delete all characters, hold down
CH/DEL for at least 1 second.
6. Press SEL .
Ijeh[ Ijeh[ Ijeh[ Ijeh[ DkcX[h DkcX[h DkcX[h DkcX[h
appears.
7. Enter the number and any tone
and pause entries (see “Using
Tone Services on a Pulse Line” on
Page 23 and “Entering a Pause”).
±
8. Press SEL . The phone beeps and
C[ceho C[ceho C[ceho C[ceho dddd Ijeh[Z Ijeh[Z Ijeh[Z Ijeh[Z
appears (
dddd
=
number). After a few seconds,
C[ceho C[ceho C[ceho C[ceho Ijeh[ Ijeh[ Ijeh[ Ijeh[
appears, and you
can repeat Steps 3–8 to store
more numbers.
To replace a stored number, simply
store a new one in its place.
'PVGTKPI"C"2CWUG
In some telephone systems, you must
dial an access code (9, for example)
and wait for a second dial tone before
you can dial an outside number. You
can store the access code with the
phone number; however, you should
also store a pause after the access
code to allow the outside line time to
connect.
±
"016'"
±
"
Each tone or pause
entry uses one digit of
memory.