Ryobi RY08554 - Manual (Page 10)

10
ASSEMBLY
Fig. 4
INSTALLING THE VACUUM BAG
See Figures 5 - 6.
 Remove the nozzle and upper blower tube from the
blower.
 Unzip the vacuum bag and place the adaptor inside as
shown.
 Align the raised slots on the bag adaptor with the raised
locking tabs on the blower housing outlet; push the bag
adaptor onto the housing. Twist to lock into place.
 Rotate the vacuum bag until the shoulder strap is up-
right.
 Make sure the vacuum bag is zipped and closed before
starting the unit.
Fig. 6
ADApTor inSTAlleD
in VAcuum bAG
rAiSeD
SloT
rAiSeD
lockinG TAb
Fig. 5
ADApTor
VAcuum bAG
INSTALLING THE VACUUM HANDLE
See Figure 4.
 Lay unit on side as shown.
 Insert vacuum handle into the base of unit.
 Secure vacuum handle in place using two knobs as
shown.
VAcuum
hAnDle
VAcuum
hAnDle
knobS