Symbols – Ryobi YN301PL1 User Manual

Page 6

Advertising
background image

6 - English

SYMBOLS

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper inter-
pretation of these symbols will allow you to operate the product better and safer.

Read The Operator’s Manual

SYMBOL

NAME

dESiGNATiON/EXPLANATiON

Do not expose to rain or use in damp locations.

To reduce the risk of injury, user must read and understand
operator’s manual before using this product.

Eye Protection

Always wear eye protection with side shields marked to comply
with ANSI Z87.1.

Wet Conditions Alert

Indicates a potential personal injury hazard.

Safety Alert

The following signal words and meanings are intended to explain the levels of risk associated with this product.

Indicates an imminently hazardous situation, which, if not avoided, will result in death
or serious injury.

Indicates a potentially hazardous situation, which, if not avoided, could result in death
or serious injury.

Indicates a potentially hazardous situation, which, if not avoided, may result in minor or
moderate injury.

(Without Safety Alert Symbol) Indicates a situation that may result in property damage.

SYMBOL SiGNAL

MEANiNG

dANGER:

CAUTiON:

CAUTiON:

WARNiNG:

Risk of Bursting

Risk of Fire or Explosion

Do not spray flammable liquid in a confined area. Spray area
must be well ventilated. Do not smoke while spraying or spray
where spark or flame is present. Keep compressors as far from
the spraying area as possible, at least 15 feet from the spraying
area and all explosive vapors.

Hot Surface

To reduce the risk of injury or damage, avoid contact with any
hot surface.

Risk to Breathing

Air obtained directly from the air compressor should never be
used to supply air for human consumption.

Do not adjust regulator to result in output pressure greater than
marked maximum pressure of attachment and/or the item being
inflated. Never use at pressure greater than 135 psi.

Risk of Electrical Shock

Hazardous Voltage: Disconnect from power source before
servicing. Compressor must be grounded.

Advertising
This manual is related to the following products: