Ricoh DIGITAL CAMERA GR - Manual (Page 33)

F
irst
-
time
u
ser
? r
ead
this
.
23
2
Select a flash mode.
Press the F button and press
# or $ to select a flash mode.
The flash mode icon is briefly
displayed in the center of the
picture display and then ap-
pears in the top left corner of
the display.
The autofocus/flash lamp blinks while the flash
charges. Photos can be taken when the lamp stops
blinking.
Note
• To close the flash when it is not in use, gently press the center of
the flash cover down until it latches.
• The flash has a range of approximately 20 cm to 3.0 m (8 in.–10 ft.),
measured from the front of the lens (auto ISO; see page 82).
• If the camera is powered by AAA batteries, the picture display will
turn off until charging is complete.
• A pre-flash is fired before the main flash to achieve optimal expo-
sure.
• Flash amount can be adjusted in Flash Exposure Compensa-
tion in the shooting menu (page 70).
Caution
• The flash turns off automatically in dynamic range, internal com-
posite, movie, continuous, and bracketing modes.
• Do not use the built-in flash with conversion lenses or lens hoods.