RCA Stereo Receiver with Remote Control - Manual (Page 4)

4
Water and Moisture — Do not use this product near water (for
example, near a bathtub, washbowl, kitchen sink, or laundry tub; in
a wet basement; or near a swimming pool).
Accessories — Do not place this product on an unstable cart, stand,
tripod, bracket, or table. The product may fall, causing serious injury
to a child or adult, and serious damage to the product. Use only with
a cart, stand, tripod, bracket, or table recommended by the
manufacturer or sold with the product.
Follow the manufacturer's instructions for mounting, and use a
recommended mounting accessory.
Carts — Move the product on a cart carefully. Quick stops,
excessive force, and uneven surfaces may cause the product/cart to
overturn.
Ventilation — Slots and openings in the cabinet provide ventilation,
ensure reliable operation, and protect from overheating. Do not
block or cover these openings, and do not place the product on a
bed, sofa, rug, or other similar surface. Do not place the product in a
built-in installation such as a bookcase or rack unless it provides
proper ventilation as specified by the manufacturer.
Power Sources — Operate this product using only the power
source indicated on its marking label. If you are not sure of your
home's power type, consult your product dealer or local power
company.
Polarization — This product is equipped with a polarized AC line
plug (a plug having one blade wider than the other). This plug will
fit in the power outlet only one way. This is a safety feature. If you
cannot insert the plug fully into the outlet, try reversing the plug. If
the plug still doesn't fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the polarized
plug. If you need an extension, use a polarized cord.
Power-Cord Protection — Route power-supply cords so they are
not likely to be walked on or pinched by items placed on or against
them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the product.
Lightning — For added protection for this product during a
lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage to the product
due to lightning and power-line surges.
Overloading — Do not overload wall outlets, extension cords, or
integral convenience receptacles, as this can result in a risk of fire or
electric shock.
Objects and Liquids — Never push objects of any kind into this
product through openings, as they may touch dangerous voltage
points or short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the product.
Servicing — Do not attempt to service this product yourself, as
opening or removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service personnel.
Damage Requiring Service — Unplug this product from the wall
outlet and refer servicing to qualified service personnel under the
following conditions:
• When the power-supply cord or plug is damaged.
• If liquid has been spilled or objects have fallen into the product.
• If the product has been exposed to rain or water.
• If the product does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions, as an improper
adjustment of other controls may result in damage and will often
require extensive work by a qualified technician to restore the
product to normal operation.
• If the product has been dropped or damaged in any way.
• When the product exhibits a distinct change in performance.
Replacement Parts — When replacement parts are required, be
sure the service technician uses replacement parts specified by the
manufacturer or having the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or other
hazards.
Safety Check — Upon completion of service or repairs to this
product, ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
Wall or Ceiling Mount — The product should be mounted to a
wall or ceiling only as recommended by the manufacturer.
Heat — The product should be situated away from heat sources
such as radiators, heat registers, stoves, or other products (including
amplifiers) that produce heat.
Non-use Periods — Unplug the receiver’s power cord when you
will not use it for extended periods.
Power Lines — Locate an outdoor antenna away from power lines.
Outdoor Antenna Grounding — If an outside antenna or cable
system is connected to the receiver, ground the antenna or cable
system so as to provide some protection against voltage surges and
built-up static charges. Article 810 of the National Electrical Code,
ANSI/NFPA 80, provides information about proper grounding of the
mast and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location of
antenna-discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode. See the example below.
Antenna
Lead-In
Wire
Antenna
Discharge Unit
(NEC Section 810-20)
Grounding Conductors
(NEC Section 810-21)
Grounding Clamps
Power Service Grounding
Electrode System
(NEC Article 250, Part H)
Ground Clamp
Electric
Service
Equipment
NEC -- National Electrical Code