Radio Shack Auvio 16-923 - Manual (Page 10)

18
O
p
e
ra
ti
o
n
19
O
p
e
ra
tio
n
Searching for Channels
Select Ch. Search from the MENU , and press  to select.
Auto channel search
1. Highlight Auto and press .
2. Highlight one of the following and press  to select:
„
Rescan to scan for channels and erase saved channel information.
„
Update to scan for channels but keep previously saved channel information.
3. Press  to start channel searching. Press  once more to stop.
Manual Channel Search
If you know the RF Channel number, you can enter it into your channel list
manually. Visit AntennaWeb.org for more information on channel numbers.
1. Highlight Manual and Press .
2. Use the joystick on the TV or use , , ,  to select numbers and press
 to input. Or, press the number buttons on your remote control to input the
channel numbers directly.
3. Select Tune and press  to find selected channel.
Examples:
„
Digital Channel Number (5-1): “5” “–““1” “Tune”
„
RF Channel Number (19): “–“ “1” ”9” “Tune”
„
Select BACK on screen or  to erase an input.
n
Notes:
„
RF Channel numbers differ from digital channel number.
„
Manually tuned channels automatically appear in the Ch. Edit list.
Verifying Digital Signal Strength
Press METER on the remote or select METER from the MENU to
view signal strength. Weak signals can be improved by moving the
antenna around. Press METER again to exit.
Editing Channels
Use this menu to edit your channel list and favorite channel list.
1. Use the joystick or , , ,  on the remote to navigate through options.
2. Press  on a channel’s corresponding check box to activate or
deactivate the channel, or to add or delete it from your favorites list.
3. Access favorite channels via the HOT menu (see page 23) or by
pressing the FAV button on the remote to cycle through favorite channels.