Rimage 360i - Manual (Page 11)

Identify the parts of the Rimage 360i
Rimage 360i Project Status Indicator (PSI)
On the front of the Rimage 360i is the Project Status
Indicator (PSI), made up of 5 LEDs.
LED: Light-emitting diode. A type of diode that emits
light when current passes through it.
The PSI communicates Rimage 360i, disc, printer,
and recorder status. Some of the functions
communicated include:
• Power
• Disc
moving
• Disc in recorder
• Disc
printing
• Ink
status
Image Name Functionality
Power
• The power LED is green when the Rimage 360i is powered on.
• The power LED is amber when the Rimage 360i is paused.
Disc in
motion
• The disc in motion LED is solid green when the disc is still.
• The disc in motion LED blinks green when the disc is in motion.
• The disc in motion LED blinks amber when the Rimage 360i is out
of blank discs.
Disc in
recorder
• The disc in recorder LED is green when the disc is in the recorder.
• The LED is dim when there is no disc in the recorder.
• The LED is amber when the recorder state is unknown.
Disc
printing
• The disc printing LED blinks green when the printer is printing or
when the printer tray is in motion.
• The disc printing LED is solid green when the printer is idle.
• The disc printing LED is solid amber when the ink cartridge access
door is open.
Ink status
• The ink status LED is solid green when the cartridges are
functioning properly.
• The ink status LED is amber when the ink is low or out.
• The ink status LED blinks amber if the cartridges are not installed
properly.
110808_C 5