Set the vcr2 channel (auto tuning), Connections & setup, Auto channel search – RCA MultiMedia Monitor User Manual
Page 22
20
Connections & Setup
SET TIME
: AM
Enter 01 to 12 for the hour.
Press OK to exit.
4.
Use the left and right arrows to point to the hour and minutes
spaces. Use the up and down arrows to scroll through the numbers
and change from AM to PM. Press OK to exit.
Auto Channel Search
The next step of the setup routine “autoprograms” channels into the
channel list.
1.
Press MENU bring up the Main menu and then select Channel.
TV MAIN MENU
1 Audio
2 Picture Quality
3 Screen
4 Channel
5 Time
6 Parental Controls
7 Setup
0 Go Back
2.
From the CHANNEL menu (shown below), select Auto Channel
Search.
CHANNEL
1 Signal Type
2 Auto Channel Search
3 List and Labels
4 Auto Tuning
0 Exit
The monitor will begin searching for channels and give you a
progress report. When the channel search is complete, press OK on
the remote to go back to the Channel menu.