Runco REFLECTION CL-510 - Manual (Page 27)

5. Menu
Runco CL-510/ CL-510LT User’s Manual
24
■ 4 x 3: The input signal will be scaled to fit in the center of the 16:9 screen.
■ LETTERBOX: The image in the Letterbox mode will be stretched vertically, and the top and bottom portion
'blanked off'. This ratio is best suited for LaserDisc movies or non-anamorphic DVD's.
■ VIRTUAL WIDE: A 4:3 image is transformed into a 16x9 image.
Options
Press Enter on selected feature to open the adjustment menu.
Reset Adjustments: Use this function to reset all values of the current source back to factory default.
Language: There are 4 different menu languages available: English, Spanish, French and German.
Picture Orientation: The projector can be installed on a ceiling or in a rear screen configuration with one or more
mirrors. There are four settings: FLOOR FRONT, CEILING FRONT, FLOOR REAR, and CEILING REAR.
Logo Light: To turn on or off projector logo light.
Sleep Timer: To setup auto off timer. The setting timer is from 10 minutes to 3 hours.
Active
Image Area
Active Image Area
Runco CL-510
> Video
S-Video
Component
Component HD
RGB HD
DVI-I
-----------------------
Aspect Ratio
Options
Set Up
Options
> Reset Adjustments
Language
Picture Orientation
Logo Light
Sleep Timer
Lamp Hours
OSD Position
PC & HD Adj.