Roberts Radio RDK-2 - Manual (Page 12)

11
Presetting stations
You may store your preferred DAB and FM radio stations to the preset
station memories (1 to 5). The procedure for setting presets and using
them to tune stations is the same for FM and DAB modes, and is described
below. Note that the radio stores FM and DAB presets separately and so
there are fi ve of each.
1. Touch the On/Standby button to switch on the radio.
2. Tune to the radio required station as previously described.
3. Touch the required Preset button for 2-3 seconds until the display
shows e.g. "Preset 1 saved". The station will be saved under the chosen
preset button. Repeat this procedure for the remaining presets.
4. Stations stored in preset memories may be over-written by following
the above procedure.
1
3
Recalling a preset station
1. Touch the On/Standby button to switch on your radio.
2. Select the required waveband by touching the Band button.
3. Momentarily touch the required Preset button, your radio will tune to
the station stored in preset memory.
Note: If you have not previously stored a preset station and the preset
buttons are pressed "Empty preset" will be displayed.
1
3
2