Radio Shack PT-668C - Manual (Page 3)

Panel Information
RANDOM RANDOM DISPLAY DISPLAY REPEAT REPEAT INTRO SCAN INTRO SCAN
RESET RESET MEMORY MEMORY MEMORY CLEAR MEMORY CLEAR
COMPACT DISC PLAYER
OPEN/CLOSE OPEN/CLOSE STOP STOP
ON / STANDBY ON / STANDBY
1 2 3 4 5 6
7 8 9 10 11 12 13
1. ON/STANDBY SWITCH
Press button to switch “ON” the unit. Press again to
switch “OFF” unit into “STANDBY MODE”.
2. Fast BWD
The player will skip backward when Fast BWD key is
pressed. Continuously pressing this button makes the
player scan through the tracks backward fast.
3. Fast FWD
The player will skip ahead to the next track each time
the Fast FWD button is pressed. Continuously pressing
this button makes the player scan through the tracks
forward fast.
4. PLAY/PAUSE
Press PLAY/PAUSE button to play and press it once
again if you wish it to pause. The relative signs will be
shown on display. If in pause mode, press this key once
again to resume the operation.
5. STOP
Press STOP key to stop playing/fastFWD/fastBWD or
any kinds of such operations.
6. OPEN/CLOSE
Press the OPEN/CLOSE button. The disc tray will slide
out. When it has opened fully, place a compact disc
carefully in the tray, and press it once to close.
7. RANDOM
The songs will be playback by random for whole disc
without repeat if you press this key once. And you can
stop it by press stop key.
8. INTRO
If you desire the introduction scanning, you can press
INTRO button. Then each track will be scanned 10
seconds. An “INTRO” will be shown on the display.
Press it once again can resume the operation, the
relative light will gone off.
9. DISPLAY
Press DISPLAY button once, the display will show out
the Track Remain Time. And press once more, Disc
Remain Time will be shown on the Musical Calendar.
Press once again can resume the operation.
10. REPEAT
Press REPEAT button once, the display will show out
REPEAT 1, then the track which is in play mode or
ready mode will repeat until you switch off the CD
player or press STOP. Press REPEAT button once more,
Repeat ALL will be shown on the display, all track will
be repeated until you switch off the CD player or press
STOP button.
11. MEMORY CLEAR
12. MEMORY
Press the MEMORY button at first, the MEMORY and
the corresponding track will be flashed. Then press the
FastFWD or FastBWD to reach your desired track and
press MEMORY button once more to store the first
track. If wishing to store the second track, press the
FastFWD or FastBWD to the second desired track and
press Memory button to store the second track.
Repeat the same procedure to similar settings. Continue
to enter track numbers until all the pre-decided tracks
are stored for playback. Press the STOP upon finishing
programming. Press PLAY button once, the different
tracks that have been stored will be played according to
the memories stored. If you wish to clear all the
memories, please press the OPEN/CLOSE switch once.
13. RESET