Technical specifications, Power supply specifications, Failsafe relay contact ratings – RuggedCom RS416 User Manual
Page 36: 6 technical specifications, 1 power supply specifications, 2 failsafe relay contact ratings
Technical Specifications
36
RuggedCom
®
RuggedServer™ RS416 Family Installation Guide rev118
6 Technical Specifications
6.1 Power Supply Specifications
Power Supply Type
4
Input Range
Internal
Fuse
Rating
Max. Power
Consumption
3
Min
Max
12 – 24 VDC
10 VDC
36 VDC
6.3A(F)
2
15 W
48 VDC
36 VDC
59 VDC
3.15A(T)
2
HI (125/250 VDC)
1
HI (110/230 VAC)
1
88 VDC
85 VAC
300 VDC
264 VAC
2A(T)
1,2
Table 13: Main Power Supply Specifications
Power Supply Type
(PS2)
4
Input Range
Internal
Fuse
Rating
Maximum Power
Consumption
Min
Max
48 VDC
37 VDC
72 VDC
2A(T)
2
68 W
Table 14: PoE Power Supply Specifications
NOTES:
1. This is the same power supply for both AC and DC.
2. (F) Denotes fast-acting fuse, (T) denotes time-delay fuse.
3. Power consumption varies based on configuration. 10/100Tx ports consume
roughly 1W less than fiber optic ports
4. RS416 can use the Main Power Supply for PS1 and optionally PS2. RS416P
uses the Main Power Supply in PS1 only and the PoE Power Supply in PS2 only.
6.2 Failsafe Relay Contact Ratings
Parameter
Value (Resistive Load)
Max Switching
Voltage
240VAC, 125VDC
Rated Switching
Current
2A @ 240VAC
0.15A @ 125VDC, 2A @ 30VDC
Max Switching
Capacity
150W, 500VA
Table 15: Failsafe Relay Contact Ratings