Radio Shack 63-5027 User Manual

Hh;hh;hh;hh, Jk; jk; jk; jk, 7bc 7bc 7bc 7bc

Advertising

OWNER’S MANUAL

Please read before using this equipment.

63-5027

08A02

Printed in China

RadioShack Corporation
Fort Worth, Texas 76102

2002 RadioShack Corporation.

RadioShack and RadioShack.com are trademarks

used by RadioShack Corporation.

63-5027

&KIKVCN"%QORCUU1%NKR"9CVEJ

Your RadioShack Digital Compass/Clip Watch provides time, stopwatch, timer,
alarm, and compass functions in one rugged, easy-to-use package.

SET/LIGHT/STP./RST. —
Use to turn on the backlight,
calibrate and set the declination on
the compass, and set and reset the
stopwatch.

%10641.5"("('#674'5

ADV.//ST./SPL/. —
Use to set and
reset options.

BEARING —
Use to display
the compass.

Clip-Style Ring —
Lets you easily secure the compass to a pack, keychain,
or strap. Simply press here to open it.

Limited One-Year Warranty

This product is warranted by RadioShack against manufacturing defects in material and
workmanship under normal use for one (1) year from the date of purchase from RadioShack
company-owned stores and authorized RadioShack franchisees and dealers. EXCEPT AS
PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IM-
PLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE
WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED
HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO CUSTOMER
OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR
DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE
PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT
NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF
TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCI-
DENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion
or limitation of incidental or consequential damages, so the above limitations or exclusions
may not apply to you.
In the event of a product defect during the warranty period, take the product and the Ra-
dioShack sales receipt as proof of purchase date to any RadioShack store. RadioShack will,
at its option, unless otherwise provided by law: (a) correct the defect by product repair with-
out charge for parts and labor; (b) replace the product with one of the same or similar de-
sign; or (c) refund the purchase price. All replaced parts and products, and products on
which a refund is made, become the property of RadioShack. New or reconditioned parts
and products may be used in the performance of warranty service. Repaired or replaced
parts and products are warranted for the remainder of the original warranty period. You will
be charged for repair or replacement of the product made after the expiration of the war-
ranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God,
abuse, accident, misuse, improper or abnormal usage, failure to follow instructions, im-
proper installation or maintenance, alteration, lightning or other incidence of excess voltage
or current; (b) any repairs other than those provided by a RadioShack Authorized Service
Facility; (c) consumables such as fuses or batteries; (d) cosmetic damage; (e) transporta-
tion, shipping or insurance costs; or (f) costs of product removal, installation, set-up service
adjustment or reinstallation.
This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state.

RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102

12/99

"%#76+10"

The compass is very sensitive to magnetic or electrical fields such
as those emanated by TVs or computer monitors. To calibrate
your compass, select a place away from those types of devices.

016'

•

appears in the

12-hour display
format.

• In alarm mode, hold

down ADV./ST./
SPL. for about 3
seconds to turn the
alarm on or off.

• In alarm chime

mode, hold down
ADV./ST./SPL. for
about 3 seconds to
turn the alarm chime
on or off.

RRRR

9#40+0)

RRRR

Keep button-cell batteries away
from children. Swallowing a
button-cell battery can be fatal.

"%#76+10"

• Use only a fresh battery of the

required size and
recommended type.

• If you do not plan to use the

compass for a month or more,
remove the battery. Batteries
can leak chemicals that can
destroy electronic parts.

016'

Your compass is designed to
work in a temperature range from
14° to 122°F (–10° to 50°C). If the
temperature is higher or lower
than this range, the display on
your compass might not work.

5'672

#.+$4#6+0)

6*'

1/2#55

'66+0)

6*'

+/'

#0&

#6'

'66+0)

6*'

.#4/

The

declination

is the

difference between
magnetic north and true
north at your location. You
can select any declination
from 00E to 99E and 00W
to 99W.

To set the declination for
your location, find your
location on the map to the
right, write down the
degree number and
direction (east or west)
closest to that location,
repeatedly press MODE to
select the degree number
and direction, then press
ADV./ST./SPL. to set it.
Then press SET.LIGHT/
STP./RST.

Press BEARING.
The direction digits
change depending
on the compass’
direction.

Hold down
SET.LIGHT/STP./RST.
for about 2 seconds.

97B

appears.

Hold the compass
horizontally or place it flat on
a wooden table, then rotate
it slowly in two complete
circles. Rotate it for at least
15 seconds per revolution.

Press SET.LIGHT/STP./
RST. The first digit flashes.

II;

',&

97B

;;;;

&&&&&&&&

Repeatedly press MODE until

JC;

then the date and time appear.
Then hold down SET.LIGHT/STP./
RST. for about 3 seconds. The
seconds digits flash.

Repeatedly press MODE to
select the hour, minute, year,
month, date, week or second,
and 12/24 hour format. You
can set the year from 2000 to
2059.

When setting the seconds, press
ADV./ST./SPL. to reset them to 00.

Press or hold down ADV./ST./SPL.
to advance through the digits or
toggle between 12- or 24-hour
display, then press SET/LIGHT/
STP./RST. to confirm.

JK;

)0)/

JK;

)0)/

JK;

(&&(

Repeatedly press MODE until

7BC

and the

set alarm time appears. Then hold down
SET.LIGHT/STP./RST. for about 3 seconds.
The hour flashes.

When the alarm time appears, press ADV./
ST./SPL.

to toggle between alarm mode and

alarm chime mode.

0&&

appears when the

compass is in alarm chime mode.

Press or hold down ADV./ST./
SPL. to advance through the
digits, then press MODE. The
minute digits flash.

When you have set the
minutes, press SET/LIGHT/
STP./RST. to confirm.

7BC

'0((

7BC

+0((

7BC

+0*.

If you do not place the
compass correctly
while calibrating it,

;hh

appears. If this
happens, start over.

;hh;hh;hh;hh

E - 27

5+0)

6*'

6129#6%*

12'4#6+10

5+0)

6*'

1/2#55

#4'

#66'4;

0&+%#6+10

Hold the compass with

below the bezel pointing in

the direction you want to read, then press BEARING.
Digits showing the current direction appear.

Rotate the bezel until the digits on the bezel closest
to the digits on the display are aligned with

on the bezel points to true north.

When you finish using the compass, press MODE or
simply wait about 70 seconds.

Repeatedly press MODE
until

9>H

appears. The last

measurement you took
appears.

Press SET/LIGHT/STP./RST.
to reset the stopwatch, then
press ADV./ST./SPL. to start it.

To take a split time, press
ADV./ST./SPL. while the
stopwatch is running.

Use a small Phillips
screwdriver to remove
the screws from the back
of the compass, then
remove the cover. Use
the screwdriver to
remove the screw from
the battery cap, then
remove the cap.

If the battery is weak, the
display dims and the
compass’ sound
becomes weak.

Keep the compass dry; if it gets wet, wipe it dry immediately. Use and store the compass
only in normal temperature environments. Handle the compass carefully; do not drop it. Keep
the compass away from dust and dirt, and wipe it with a damp cloth occasionally to keep it
looking new.

'2.#%+0)

6*'

#66'4;

Press SET/LIGHT/STP./RST.
to stop the stopwatch.

5+0)

6*'

+/'4

Repeatedly press MODE until

JCH

appears. The last

countdown mode (

9:I

(countdown stop),

9:H

(countdown repeat), or

9:K

(countdown up)) and the last
measurement you took
appears.

Hold down SET/LIGHT/
STP./RST. for about 3
seconds. The second
digits flash.

Repeatedly press ADV./ST./
SPL. to change the selected
setting, then repeatedly
press MODE to select the
second, minute, hour, and
countdown mode.

Make sure the
positive (+) side of
the fresh battery
faces up.

When you finish setting the
timer, press SET/LIGHT/
STP./RST.

To start the timer, press ADV./
ST./SPL.To stop the timer and
reload the preset time, press
SET/LIGHT/STP./RST.

II;

',&

9>H

((((ээээээээ(&(&(&(&

‘

9>H

&&&&ээээээээ&&&&&&&&

‘

9:H

''''0000&,&,&,&,

9:H

''''0000&,&,&,&,

9:H

''''0000&,&,&,&,

9:H

((((0000&&&&&&&&

CR2032

CR20

MODE —
Use to set the
display mode.

BEZEL

016'

In time display mode,
press ADV./ST./SPL.
to toggle between time
and date.

'5'66+0)

6*'

1/2#55

If the compass does not
work properly, reset it by
pressing all buttons at
the same time.

Advertising