RayTek 3i - Manual (Page 35)

Raynger 3i Series Operator’s Manual 2-23
2.6 DATA OUTPUTS
Data outputs from the instrument provide a direct interface to chart recorders, print-
ers, and computers. All models are equipped with an output jack capable of provid-
ing analog and digital signals, which are user selectable in the SET loop. The format
of these signals are as follows:
• Digital: RS-232
Format: ASCII data
Baud Rate: 9600
Data Format: 8 bits, 1 stop bit, no parity
• Analog: 1 mV/° (°C or °F) for all models except the 1M
1 mV/°C or 0.5 mV/°F for the 1M
F0072 E 095 MAX 0080
F0072 E 095 MAX 0080
F0072 E 095 MAX 0080
F0072 E 095 MAX 0080
F0072 E 095 MAX 0080
F0072 E 095 MAX 0080
F0072 E 095 MAX 0080
F0072 E 095 MAX 0080
F0072 E 095 MAX 0080
F0072 E095 MAX 0080 F0072 E095 MAX 0080 F0072 E095 MAX 0080 F0072 E095 MAX 0080 F0072 E095 MAX 0080 F0072 E095 MAX 0080
Analog
RS232
RS232
Figure 2-12: Data Outputs