Roberts Radio ZoomBox - Manual (Page 12)

11
Dynamic Range Control (DRC) settings - DAB only
DRC can make quieter sounds easier to hear when your radio is used in
a noisy environment. This function is only for the DAB waveband.
1. Switch the unit on by rotating the Function switch to the Radio
position.
2. Slide the DAB/FM switch to the 'DAB' position. 'DAB' will show on
the display.
3. Press and hold the Menu button until 'SELECT Manual' appears on
the display.
4. Press and release the Tuning Up or Down buttons until the display
shows 'SELECT DRC'.
5. Press and release the Select button to enter adjustment mode.
6. Press and release the Tuning Up or Down buttons to select required
DRC setting (default is 0) .
DRC 0 DRC is switched off, Broadcast DRC will be ignored.
DRC 1/2 DRC level is set to 1/2 that sent by broadcaster.
DRC 1 DRC is set as sent by broadcaster.
7. Press and release the Select button to confi rm the setting. The display
will return to radio mode.
Note: Not all DAB broadcasts are able to use the DRC function. If the
broadcast does not support DRC then the DRC setting in the radio will
have no effect.
1
2
5,7
3
4,6 4,6