Roberts Radio CR9935 - Manual (Page 10)

Setting the alarm times
1. Press and hold down the Alarm 1 or Alarm 2 buttons.
2. Whilst the Alarm 1 or Alarm 2 button is held down set the alarm
time by pressing the Up or Down buttons. The clock uses the 24
hour system e.g. 2:30pm is shown as 14:30. At this stage disregard
symbols.
3. Release the Alarm button when alarm setting is complete.
Displaying the alarm time
1. Ensure that the radio is switched off.
2. Press the Display button once to display alarm 1 time and twice
to display alarm 2 time. After 3 seconds the display will revert to
showing clock time.
Wake to buzzer
1. Set the alarm time as previously described.
2. Press and release the Alarm 1 or Alarm 2 button until the
or symbol appears in the display.
3. At the preselected time the buzzer will switch on. The buzzer will
switch off automatically after 90 minutes. The buzzer alarm may be
switched off for 24 hours by pressing the On/Off button.
4. To permanently cancel the buzzer alarm repeatedly press and
release the Alarm 1 or Alarm 2 button until the or
symbols are removed from the display.
9
2
2
2
3
4
1
1 1