RAD Data comm 100 - Manual (Page 5)

WAN
• Protocol
HDLC
• Data Rate
Up to 10 Mbps synchronous
• Throughput
With WAN rate 10 Mbps:
19700 pps for 64-byte frames and
increment byte data (00, 01, 02, …)
802 pps for 1536-byte frames and
increment byte data (00, 01, 02, …)
• 4-wire Range
700m (2300 ft)
• Connectors
V.24/RS-232, DB-25 female
V.35, 34-pin female via adapter cable
V.36/RS-422, DB-37 female via adapter
cable
RS-530, DB-25 female
X.21, DB-15 female via adapter cable
4-wire: 5-pin terminal block
• Operating Range
Using Cat. 5 UTP cable:
10 Mbps: 500m (1640 ft)
5 Mbps: 700m (2300 ft)
GENERAL
• Physical
Length: 69 mm / 2.7 in
Width: 53 mm / 2.1 in
Height: 18 mm / 0.7 in
Weight: 30 g / 1.0 oz
• Power Supply
External 5 VDC/0.6A regulated adapter
Note: While TinyBridge-100 operates with any
regulated 5 VDC, 600 mA power supply, the CE
approval for the 4-wire versions requires provision of a
grounding path through the use of a power supply with
a three-prong plug.
• Power Consumption
400 mA @ 5 VDC
• Environment
Temperature: 0–50°C (32–122°F)
Humidity: Up to 90%, non-condensing
SAFETY
Safety Instructions
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
IMPORTANT
North American Users
The TinyBridge-100 is powered by an
external power supply. To reduce the risk of
electric shock, fire and injury to persons:
Use only with a UL-listed and CSA Certified
Class 2 power supply rated 5 VDC, 600 mA
or more.
Instructions de Sécurité
Le point d’exclamation dans le triangle
équilatéral alerte l’utilisateur d’importantes
instructions concernant le fonctionement et
l’entretien mentionées dans le livre qui
accompagne l’appareil.
IMPORTANT
Pour les utilisateurs Nord Américains
Le TinyBridge-100 est renforcé par un
transformateur extérieur. Afin de réduire le
risque d’électrocution, de feux ou de
blessure:
Utiliser seulement avec le UL listé et le CSA
Certifié Classe 2 le transformateur de 5
VDC, 600 mA, ou plus.