Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Caller ID/Call Waiting Deluxe - Manual (Page 20)

20 Caller ID Operation
through the records. To scroll quickly through
the records, hold down
VOL / CID
8 8 8 8
or
9 9 9 9
.
When you scroll past the last record, the total
record number appears, then the first record.
When you scroll past the first record, the total
record number appears, then the last record.
The top line of each record shows the date,
time and the number of calls from that num-
ber. The second line shows the caller’s
name, and the third line shows the caller’s
phone number.
To exit the Caller ID record display, press
CID .
CALLER ID MESSAGES
ADDING/DELETING
THE AREA CODE
When the area code of the received call is
the same as the one you stored (see “Storing
Your Area Code” on Page 12), the caller ID
record does not show the area code. If it is
different, the record shows the area code.
However, you can add or delete the area
code on the display. When the record is on
the display, press
3 to add or delete the area
code. Pressing 3 again deletes or adds the
area code.
DIALING NUMBERS FROM
A CALLER ID RECORD
To dial a local number stored in a Caller ID
record, recall the record, then press
TALK . If
it is a long distance call, press 1 (
''''
appears
before the displayed number) before you
press
TALK . If you want to add or delete the
area code, press 3 before you press TALK .
Note: If a Caller ID record does not contain a
phone number (if it was blocked by the caller,
for example) you cannot dial from that
record.
STORING A CALLER ID
RECORD TO MEMORY
Follow these steps to store the name and
number from a Caller ID record into a memo-
ry location.
1. Press CID then VOL / CID
8 8 8 8
or
9 9 9 9
to
recall the record you want to store.
If you want to add or delete the area
code, press
3 .
2. Press MEM .
I[b[Yj I[b[Yj I[b[Yj I[b[Yj BeYWj_ed BeYWj_ed BeYWj_ed BeYWj_ed
appears.
3. Choose a memory location (
&' &' &' &'
–
(& (& (& (&
) by
pressing a number or by repeatedly
pressing
VOL / CID
8 8 8 8
or
9 9 9 9
, then press-
ing SELECT/CH .
If the selected location is empty, the phone
beeps to confirm that it stored the number,
then the Caller ID record appears.
If a record exists in the selected location,
H[# H[# H[# H[#
fbWY[ fbWY[ fbWY[ fbWY[ C[ceho5 C[ceho5 C[ceho5 C[ceho5
appears, prompting you to
Display Description
D[m0NN D[m0NN D[m0NN D[m0NN
JejWb0NN JejWb0NN JejWb0NN JejWb0NN
Shows the number of new
Caller ID records (records
you have not reviewed) and
the total number of records.
Fh_lWj[ Fh_lWj[ Fh_lWj[ Fh_lWj[ DWc[ DWc[ DWc[ DWc[
or
Fh_lWj[ Fh_lWj[ Fh_lWj[ Fh_lWj[ DkcX[h DkcX[h DkcX[h DkcX[h
The caller has blocked the
Caller ID information.
Kdademd Kdademd Kdademd Kdademd DWc[ DWc[ DWc[ DWc[
or
Kdademd Kdademd Kdademd Kdademd Dkc# Dkc# Dkc# Dkc#
X[h X[h X[h X[h
The caller is not within a
Caller ID service area.
?dYecfb[j[ ?dYecfb[j[ ?dYecfb[j[ ?dYecfb[j[ :WjW :WjW :WjW :WjW
Appears if there was an
error during the transmis-
sion of Caller ID information.
Occasional errors are nor-
mal. If the phone frequently
displays
?dYecfb[j[ ?dYecfb[j[ ?dYecfb[j[ ?dYecfb[j[ :WjW :WjW :WjW :WjW
,
contact your local telephone
company or RadioShack
store.