Roberts Radio CR9945 - Manual (Page 10)

Checking alarm times
1. Press and hold down either 1 or 2 buttons. The display will
change from normal time to alarm time - days of the week indicators
will show days of the week on which alarm will activate. Release the
Alarm button to return to normal time
Listening to the radio
1. Switch on the radio by pressing the On/Off button. Select the
required waveband using the Waveband switch.
2. Tune in to the desired station using the Tuning control. Adjust
volume using the Volume control.
3. The Wire aerial located on the rear of your clock radio is for FM
reception. The wire should be fully extended and positioned for
optimum reception.
For MW (AM) reception there is a built in ferrite aerial. Rotate your
clock radio to the position giving best reception.
9