Olympus DS-40 - Manual (Page 17)

17
1
Setting Time/Date (Time&Date)
If you set the date and time beforehand, the information when the file is recorded is automatically
stored for each file. Setting the date and time beforehand enables easier file management.
1 Press the 9 or 0 button to select
the item to set.
Select the item from “hour”, “minute”, “year”
“month” and “day” with a flashing point.
2 Press the
+
or
–
button to set.
Follow the same steps by pressing the 9
or 0 button to select the next item, and
press the + or – button to set.
• You can choose between 12 and 24 hour display by pressing
the DISPLAY button while setting the hour and minute.
Example: 5:45 P.M.
5:45 PM ←→ 17:45
• You can choose the order of the year, month, day by pressing
the DISPLAY button while setting them.
Example: January 14, 2006
Setting T
ime/Date
When you use the recorder for the first time after purchasing it, or turn the
power on after having removed the batteries for one minute or longer to
change them or for other purposes, the “Set Time & Date” message may
appear. If the “Hour” indicator flashes, follow the steps below to set it.
(Initial setting)
2
1
1 M 14 D 2006 Y
(Initial setting)
14 D 1 M 2006 Y 2006 Y 1 M 14 D