Optiview G0521 - Manual (Page 48)

DVR Server Manual ver.5.05/rel.092507
44
3.5 Alarm setup
Press button to set alarm parameters.
【Camera】Select a camera to be set from the drop-list and you can copy the configuration to
the other cameras by clicking copy button.
【Alarm Type】Select alarm type: Motion detect, Tempering alarm and Video Loss.
【Level】Select sensitivity levels from 0 (the lowest level) to 5 (the highest level) for the alarm.
【Set motion detection areas】Left-click mouse and drag it on the screen to select motion
detect area. You can select the whole area or many areas. Also, you can clear one or entire
area by pressing the button clear and test the effect by clicking test button.
【Policy】 Selecting ―Handling current alarm‖ first, handling policies will be available as follows:
Audible warning —Indicates the alarm with voice.
Upload to DVR Server —Update the alarm information to center.
Trigger alarm out —Trigger alarm box to output the alarm.
【Trigger record camera】Set cameras to record triggered by the alarm. You can select one or
more channels. When there is an alarm input, the cameras will be triggered to record (the
record type of the channel is Alarm Record), and the monitor will switch to preview the cameras
(warning on monitor is enable).
【Schedule】Set alarm input precaution time. Select date firstly, then set time segment
according to the sequence. The time of each segment should not overlap the others and no
skips are allowed. After the precaution time of a certain day is set, you can copy the parameter
to other dates by selecting a day and pressing the copy button.