Thermos 465630003 - Manual (Page 22)

22 • Fire & Ice
Connecting The Adapter Hose To The LP Tank (continued)
5. Hold hose end, insert nipple (A) into LP tank valve. Hand tighten coupling nut,
(B) so as not to cross thread
the connection.
holding connector in a straight line with LP tank valve
Position coupling nut
and hose-end as shown
for proper connection to
LP tank valve.
Nipple must be centered
into the LP tank valve.
Coupling nut
Straight
A
B
6. Turn the coupling nut clockwise to tighten to a full solid stop. The hose-end will seal on
the back-check feature in the LP tank valve, resulting in some resistance.
If you cannot complete connection, disconnect hose-end and repeat steps 5 and 6. If
you are still unable to complete the connection,
An additional
one-half to three quarters turn is required to complete connection. Tighten by hand
only - do not use tools.
NOTE:
do not use this connector!
WARNING
• Do not insert any foreign objects into the valve outlet. You may damage the valve
and cause a leak. Leaking propane may result in explosion, fire, severe personal
injury, or death.
• Never attempt to attach this grill to the self-contained LP gas system of a camper
trailer or motor home.