TRENDnet TEW-630APB - Manual (Page 4)

2. Install Hardware
English
2
2. Connect the AC Power Adapter to
the Access Point and then to a
power outlet.
Note: Locate an optimum location for the Access Point. The best place for the
Access Point is usually at the center of your wireless network. Please connect
the computer configuring the TEW-630APB to the same switch/hub.
1. Connect a RJ-45 cable from the
Switch/Hub to the
LAN port of the
Access Point.
3. Verify that the following front panel
lights are on:
Power, LAN and
WLAN.