Texas Instruments TI-84 - Manual (Page 557)

Chapter 19: Communication Link 554
When you select an item on the LINK SEND menu, the corresponding SELECT screen is
displayed.
Note: Each SELECT screen, except All+… , is initially displayed with nothing pre-selected.
All+… is displayed with everything pre-selected.
To select items to send:
1. Press
y 8 on the sending unit to display the
LINK SEND menu.
2. Select the menu item that describes the data type to send. The corresponding
SELECT screen is displayed.
3. Press
} and † to move the selection cursor ( 4 ) to an item you want to select or
deselect.
4. Press
Í to select or deselect the item. Selected names are marked with a 0.
D: AppVars ... Displays all software application variables.
E: Group ... Displays all grouped variables.
F: SendId Sends the Calculator ID number immediately.
(You do not need to select SEND.)
G: SendOS Sends operating system updates to another
TI-84 Plus Silver Edition or TI-84 Plus. You can
not send the operating system to the TI-83 Plus
product family.
H: Back Up ... Selects all RAM and mode settings (no Flash
applications or archived items) for backup to
another TI-84 Plus, TI-84 Plus Silver Edition,
TI-83 Plus Silver Edition, or to a TI-83 Plus.
SEND RECEIVE