Toshiba PWU001Z-1 - Manual (Page 5)

E6580724
1. Overview
Following six functions are available with this parameter writer.
1. Copying function
Data can be copied from a memory to another memory among four memories, three (memories A, B,
C) of the parameter writer and one of the inverter.
(1) Data copy from parameter writer to inverter
(2) Data copy from inverter to parameter writer
(3) Data copy from a memory to another memory of the parameter writer
2. Simply copying function
Data stored in a memory of the parameter writer can be copied to the inverter's memory by simple
operation of two keys.
3. Comparing function
Data written on two memories among four memories, three of the parameter writer and one of the
inverter, can be compared with each other.
(1) Comparing data of the parameter writer with data of the inverter.
(2) Comparing data of the inverter with data of the parameter.
(3) Comparing data of two memories of the parameter writer with each other.
4. Memory protecting function
Data written on the inverter's memory and the memories A, B and C of the parameter writer are
protected by this function (to inhibit data writing).
5. Memory initializing function
A selected memory (memory A, B, C) or all of memories including system memory of the parameter
writer, if selected, are initialized by this function.
6. Function to serve as remote keypad
The parameter writer can be used as an operation panel of the inverter.
Memory configuration
The parameter writer has three memories of A, B and C to retain three kinds of parameters for the
inverter.
Memory
Memory
Memory
To Inverter
To Inverter
Parameter writer
Communication cable between parameter writer
and inverter (To be purchased separately)