5 using your aquatrio, 1 cleaning floors – Philips FC7070 User Manual

Page 10

Advertising
background image

10

3

Press the parking position release button

and release the appliance from parking

position. To avoid bending your back, press the

parking position release button with your foot.

4

Push the unlock slide forwards (1) and press

and hold the power-on button (2). You can

release the unlock slide when the appliance

switches on (3), but keep the power-on

button pressed during cleaning (4).

4

7

Lift and hold the lever (1) and slide the clean

water tank back into the appliance completely

(2). Then press down the lever (3) to lock the

clean water tank into place (‘click’).

4.1.1 Important to know

• When you have filled the clean water tank,

make sure the lever is closed properly. If

the lever is not locked properly, the clean

water tank may fall out when you release the

appliance from its parking position.

• When you switch on the appliance after filling

the clean water tank, it can take a little while

before water comes out of the nozzle. The

tank full/tank empty light may flash a few times

and the appliance may switch off automatically.

If this happens, switch on the appliance again.

5 Using your AquaTrio

5.1 Cleaning floors

1

Before you start cleaning your floors, clear the

floor of loose objects such as toys, magazines

and shoes. Move aside the mains cords of

other appliances.

2

Turn the cord storage hook downwards and

remove the mains cord. Put the mains plug in

a wall socket.

Advertising