Toshiba F25Series - Manual (Page 99)

99 Learning the Basics
Backing up your work
5.375 x 8.375 ver 2.3
Removing a disc
Never press the eject button or turn off the computer while the
drive-in-use light is glowing. Doing so could damage the disk
or the drive.
The computer must be powered on to eject a disc.
1 Locate and press the eject button.
The disc partially ejects from the slot.
2 Grasp the disc and remove it from the computer, then
place the disc in its protective cover.
Caring for CD or DVD Discs
❖ Store your discs in their original containers to protect
them from scratches and keep them clean.
❖ Do not bend a disc or place heavy objects on top of it.
❖ Do not apply a label to or otherwise mar the surface of a
disc.
❖ Hold a disc by its outside edge. Fingerprints on the
surface can prevent the DVD-ROM drive or multi-
function drive from reading the data properly.
❖ Do not expose discs to direct sunlight or extreme heat or
cold.
❖ To clean a disc that is dirty, wipe it with a clean, dry
cloth. The most efficient method to clean it is to start
from the center of the disc and wipe toward the outward
edge (not in a circle). If necessary, moisten the cloth with
water or a neutral cleaner (not benzine or rubbing
alcohol). Let the disc dry completely before inserting it in
the drive.
NOTE