Tascam HS-4000 - Manual (Page 64)

64
TASCAM HS-4000
9 – Playlist mode
Edit the playback starting time
1. Press the HOME key on the front panel to open the
Home screen.
2. Touch a file name or title name button display and then
touch the ADJUST ENTRY button in the pull-down menu to
open the ADJUST ENTRY XXX screen. (“ XXX ” is the entry
number.)
NOTE
You can also open this screen by touching the MENU button and then
touching the ADJUST button in the pull-up menu when a take is selected on
the ENTRY list screen or one of the key assign buttons on the left is selected on
the ASSIGN file screen.
Entry List Screen
Assign File Screen
3. The value shown next to the Start TC item is the
playback starting time for the selected entry. Press
the
EDIT button for the START TC item to open the
EDIT START T/C screen where you can change the
playback starting time.
Use the FRAME EDIT button on the EDIT START T/C
screen to set whether or not you will edit the frame value.
4. Use the number buttons to input the playback
starting time for the entry.
・ If you begin input without selecting a digit, input will start
from the smallest one.
・ To input a specific digit, touch it to make its background
yellow, and then use the number buttons or the DATA
dial to enter two digits at a time.
・ Touch the CURRENT ▼ button to copy the current time
code time to the input value.
・ Touch the CLEAR button to erase all entered values.
5. Touch the ENTER button to confirm the setting.
NOTE
If the entry that you are trying to edit is currently playing, when you touch the
Enter button, a “ Cannot change now. Currently Playing ” message
appears, and you will not be able to change the playback starting time. Stop
playback before touching the
Enter button.
TIP
・ You can also use the PLAY key and other transport keys while listening
to the audio to find the location, and then press the CURRENT
button to input that value here.
・ This can also be edited using an externally connected keyboard.
・ Press the keyboard’s ESC key to clear all the values.