Texas Instruments DMSoC Analog to Digital Converter Interface TMS320DM36x User Manual
Page 6

Related Documentation From Texas Instruments
www.ti.com
Receiver/Transmitter (UART) Users Guide This document describes the universal asynchronous
receiver/transmitter (UART) peripheral in the TMS320DM36x Digital Media System-on-Chip
(DMSoC). The UART peripheral performs serial-to-parallel conversion on data received from a
peripheral device, and parallel-to-serial conversion on data received from the CPU.
Peripheral Users Guide This document describes the inter-integrated circuit (I2C) peripheral in the
TMS320DM36x Digital Media System-on-Chip (DMSoC). The I2C peripheral provides an interface
between the DMSoC and other devices compliant with the I2C-bus specification and connected by
way of an I2C-bus. External components attached to this 2-wire serial bus can transmit and receive
up to 8-bit wide data to and from the DMSoC through the I2C peripheral. This document assumes
the reader is familiar with the I2C-bus specification.
Guide This document This document describes the memory stick controller in the TMS320DM36x
Digital Media System-on-Chip (DMSoC). Memory Stick cards are used in a number of applications
to provide removable data storage. The memory stick controller provides an interface to external
Memory Stick cards. The communication between the controller and the cards is performed by the
Memory Stick protocol.
Digital (SD) Card Controller Users Guide This document describes the multimedia card
(MMC)/secure digital (SD) card controller in the TMS320DM36x Digital Media System-on-Chip
(DMSoC). The MMC/SD card is used in a number of applications to provide removable data
storage. The MMC/SD controller provides an interface to external MMC and SD cards. The
communication between the MMC/SD controller and MMC/SD card(s) is performed by the MMC/SD
protocol.
Users Guide This document describes the pulse-width modulator (PWM) peripheral in the
TMS320DM36x Digital Media System-on-Chip (DMSoC).
Users Guide This document describes the Real Time Out (RTO) controller in the TMS320DM36x
Digital Media System-on-Chip (DMSoC).
(GPIO) Users Guide This document describes the general-purpose input/output (GPIO) peripheral
in the TMS320DM36x Digital Media System-on-Chip (DMSoC). The GPIO peripheral provides
dedicated general-purpose pins that can be configured as either inputs or outputs. When configured
as an input, you can detect the state of the input by reading the state of an internal register. When
configured as an output, you can write to an internal register to control the state driven on the
output pin.
Controller Users Guide This document describes the universal serial bus (USB) controller in the
TMS320DM36x Digital Media System-on-Chip (DMSoC). The USB controller supports data
throughput rates up to 480 Mbps. It provides a mechanism for data transfer between USB devices
and also supports host negotiation.
Access (EDMA) Controller Users Guide This document describes the operation of the enhanced
direct memory access (EDMA3) controller in the TMS320DM36x Digital Media System-on-Chip
(DMSoC). The EDMA controller's primary purpose is to service user-programmed data transfers
between two memory-mapped slave endpoints on the DMSoC.
Interface (EMIF) Users Guide This document describes the asynchronous external memory
interface (EMIF) in the TMS320DM36x Digital Media System-on-Chip (DMSoC). The EMIF supports
a glueless interface to a variety of external devices.
6
Read This First
SPRUFI7 – March 2009