TRENDnet TDM-E400 - Manual (Page 17)

17
1
Getting to Know the TDM-400 / TDM-C400
Ethernet Modem Router
Features
f Internal ADSL2+ modem for high-speed Internet access
f 10/100Base-T Ethernet Modem Router to provide Internet
connectivity to all computers on your LAN
f USB port for connecting a USB-enabled PC (For
Ethernet/USB combo model only)
f Network address translation (NAT), firewall, and IP filtering
functions to provide security for your LAN
f Network configuration through DHCP Server and DHCP
Relay
f Services including IP route and DNS server configuration,
RIP, and IP and DSL performance monitoring
f Configuration program you access via your Web browser
System Requirements
In order to use the Ethernet Modem Router, you must have the
following:
f ADSL/ADSL2/ADSL2+ service up and running on your
telephone line.
f One or more computers each containing an Ethernet
10Base-T/100Base-T network interface card (NIC) and/or a
single computer with a USB port
f An Ethernet hub or switch, if you are connecting the device
to more than one computer on an Ethernet network
f For system configuration using the supplied web-based
program: a web browser such as Internet Explorer v5.0 or
later, or Netscape v6.1 or later